Cooling Tower Infill Block
The purpose of fill in a cooling tower is to cool water to make full use of water resources, reduce the load of urban tap water supply network, and reduce the operating cost, cooling water is treated by cooling tower and recycled.
Matters needing attention when replacing the Cooling Tower Fill.
♦ The waveforms between the monolithic and the monolithic must be diagonally staggered so that they have good thermal resistance.
♦ The cuboidal packing assembly unit is most suitable for matching with the square tower and with the circumference of the circular cooling tower. A gap will be formed, and it needs to be filled with a different number of single sheets according to the size of the gap.
♦ Once the plug is blocked, it is not easy to clean. When the jam is serious, it needs to be replaced as a whole and it will increase the cost.
Round Type Cooling Tower
WHAT IS A ROUND COOLING TOWER?
A round cooling tower, also commonly referred to as bottle shape cooling tower, is one of the most widely used cooling systems used not only in large manufacturing plants but also in other residential and commercial buildings such as airports, shopping malls, hospitals, and schools. This essential heat removal device functions by processing the waste heat that is released into the atmosphere via an internal circulation system.
Square Type Cooling Tower
Square cooling towers are considered a cost-effective substitute for other cooling towers. Powertech, being a cooling tower manufacturer also offers installation. Towers are designed with nozzles to distribute water evenly over the filling area. Mostly designed either with PVC or heat-tolerant ABS material, square cooling towers are usually designed using fiberglass reinforced plastic, making them weather resistant and corrosion-free. One of the promising advantages of using a square cooling tower is the functioning of the drift eliminator towards reducing entrainment of water up to 0.02 percent of the flow rate.
